Using The Tape Counter; Searching For A Specific Sequence - Samsung DVD-V 62K Instruction Manual

VCR

Searching for a Specific Sequence

GB
INTRO SCAN :
INDEX SEARCH : - 6
2
2
26
Intro Scan
1 After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
Press the OK or ❿¤.
2
➛ ➛ ❿ ❿
3
Press the or buttons depending on the direction
where your desired programme is located.
4 When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
5
If you want to watch the tape from a particular Index, simply press
❿ II
.
ndex Skip Search:
I
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
Press the OK or ❿¤.
2
➛ ➛ ❿ ❿
3
Press the or buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press
➛ ➛ ➛ ➛
backwards: (press ). ( -20 0 +20
❿ II
5 To cancel an Index search simply press the

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
or
œ ❷
(hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
Start playback or Recording.
Press the
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 17).
Press INFO.:
œ or ❷
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
❿ ❿
) or
❿ ❿✌
or button.
button.
➛ ➛ ❿ ❿
or .
VCR
GB
0:00:00
KARAOKE SEARCH
KARAOKE
2
VOLUME PROG / TRK
27