Table of Contents
Advertisement
VCR
Modifying
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press M
a second time to confirm.
ENU
GB
If you wish to...
Select an input source other
than the tuner (LINE IN 1 or LINE IN 2)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
32
Programming
Then...
N
Press the ➛ or ❿ buttons, until the
PR
selection flashes.
N
Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
•
The LINE IN 1 or LINE IN 2 source using the INPUT
SEL. button for a satellite tuner or external video
source
➢
The input source must be selected before changing any other
value.
N
Press the ➛ or ❿ buttons, until the
selection flashes.
DAY
N
Press the
or
buttons, until the
(Daily) value is
DLY
❷
displayed.
N
Press the ➛ or ❿ buttons, until the
DAY
selection flashes.
N
Press the
or
buttons, until the
W-
(Week) value is
❷
displayed, followed by the required day.
Example:
(Weekly Saturday)
W-SA
N
Press the ➛ or ❿ buttons, until the
selection flashes.
STOP
N
Press the
or
buttons to increase or decrease the stop
❷
time.
N
Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
N
Press the
or
buttons until the correct indication is
❷
displayed:
• AUTO
(Auto Tape Speed Select) : see page 33
• SP
(Standard Play)
• LP
(Long Play)
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The
Timer Method
menu is displayed.
2
Press ❿ to select the input source.
3
Select the required station by pressing the
,
❷
INPUT SEL. to select the LINE1, LINE2 input sources.
4
Press ❿ to select the recording day.
5
Select the required day by pressing the
or
❷
6
Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
8
Press ❿ to select the minutes.
9
Select the required minute value by pressing the
buttons.
10
Press ❿ to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press ❿ to select the recording speed.
13
Press the
or
buttons to select the
SP
(Standard Play),
❷
(Long Play),
(Auto Tape Speed Select) recording speeds.
Auto
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
➢
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
VCR
Timer Method
Standard
G-Code
buttons or
buttons.
or
buttons.
❷
or
❷
STANDBY/ON
OPEN/CLOSE
or
❷
15
LP
GB
33
Advertisement
Table of Contents
