Kenwood VRS-5100 Instruction Manual page 15

Preparing for surround sound
The flow of the SETUP is as follows:
SP SETUP TEST TONE
6ch AMP setting
AUTO MANUAL
Subwoofer
L
L R
Front
C
C
Center
R
Surround
RS
LS RS
Surround
RB LB RB
Back
LB
Subwoofer
SW
Re-mix
LS
SW
• If you have selected BS/SW BS as the 6ch AMP setting, "RB"
and "LB" are not appeared but "BS" is appeared on the Display.
4
Select a speaker system.
1 Press the SETUP key again so that the Subwoofer setting
indication "SW ON" appears.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
2 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to
select the appropriate subwoofer setting.
1 SW ON
: Subwoofer setting mode to the amplifier is
ON.
2 SW OFF
: Subwoofer setting mode to the amplifier is
OFF.
• When the setting "SW OFF" is selected using the SETUP key,
the Front speakers are automatically set to "FRNT LRG" and the
procedure skips to step 6.
Before step 6, press the SETUP key to accept the setting.
3 Press the SETUP key to accept the setting.
• The Front speakers setting indication "FRONT" appears.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
4 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to
select the appropriate Front Speakers setting.
1 FRNT LRG (large)
2 FRNT NML (normal)
• For "FRNT LRG" and "SW ON" selection, no sound will be
heard from Subwoofer speaker even when it is set to on.
However, if you select "REMIX ON" in step @ when Subwoofer
is selected, you will be able to hear sound from the Subwoofer.
5 Press the SETUP key to accept the setting.
• The Center speaker setting indication "CNTR" appears.
DISTANCE SP EQ DIMMER
Front Dimmer
Center
Surround
Surround
Back
Subwoofer
DIGITAL ST.
L
AUTO
LFE
LS
DIGITAL ST.
L
AUTO
LFE
LS
: Large Front speakers are con-
nected to the amplifier.
: Average size Front speakers are
connected to the amplifier.
6 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to
select the appropriate Center speaker setting.
If you selected "LRG" as the Front speakers setting,
1 CNTR NML (normal)
EXIT
2 CNTR LRG (large)
3 CNTR OFF
If you selected "NML" as the Front speakers setting,
1 CNTR NML (normal)
2 CNTR OFF
7 Press the SETUP key again to accept the setting.
• The Surround speaker indication "SURR" appears.
8 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to
select the appropriate Surround speaker setting.
If you selected "LRG" as the Center speaker setting,
1 SURR NML (normal): Average size Surround speakers are
2 SURR LRG (large)
C R
SW
3 SURR OFF
S BS RS
If you selected other than "LRG" as the Center speaker setting,
1 SURR NML (normal) : Surround speaker setting mode to
2 SURR OFF
• When the setting "SURR OFF" is selected, by pressing the SET
UP key in step 9 the procedure skips to step @. But if "SW
OFF" is selected, press the SETUP key to skip to step 5.
9 Press the SETUP key again to accept the setting.
• When selecting "BS/SW BS" with the 6ch AMP setting, the
Surround Back speaker setting indication "BS" appears.
When selecting "BS/SW SW" or "BS/SW OFF" with the 6ch
AMP setting, the Surround Back speaker setting indication "LB/
C R
RB" appears.
SW
S BS RS
0 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to
select appropriate Surround Back speaker setting.
If you selected "LRG" as the Surround speaker setting,
1 BS NML (normal) : Average size Surround Back speaker
2 BS LRG (large)
3 BS OFF
DOLBY DEX
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
If you selected "NML" as the Surround speaker setting,
1 BS NML (normal) : Surround Back speaker setting mode
2 BS OFF
: An average size Center speaker
is connected to the amplifier.
: A large Center speaker is con-
nected to the amplifier.
: Center speaker setting mode to
the amplifier is OFF.
: Center speaker setting mode to
the receiver is ON.
: Center speaker setting mode to
the receiver is OFF.
connected to the amplifier.
: Large Surround speakers are
connected to the amplifier.
: Surround speaker setting mode to
the amplifier is OFF.
the amplifier is ON.
: Surround speaker setting mode to
the amplifier is OFF.
is connected to the amplifier.
: Large Surround Back speaker is con-
nected to the amplifier.
: Surround Back speaker setting mode
to the amplifier is OFF.
NEO:6 DSP TS MUTE DIGITAL
to the amplifier is ON.
: Surround Back speaker setting mode
to the amplifier is OFF.
Continued to next page
ST.
L C R
AUTO
LFE SW
LS S BS RS
15
EN