Switching The Level Meter - Kenwood AX-7 Instruction Manual

Switching the level meter

1
Select "LEVEL METER".
Press the MODE key, turn the INPUT SEL./
MULTI CONTROL knob to select "LEVEL
METER". Then press the SET key.
2
Switch between ON and OFF.
1
Select ON or OFF.
2
Press the SET key.
AUTO POWER SAVE (A.P.S.) function
When the unit is ON and the unit is left for about 30 minutes with DVD/CD not operating, the unit is switched off
(standby) automatically by this function. This is convenient when you forgot to switch off the unit. This function
can be activated or deactivated by the following operation.
1
Select "A.P.S. SET".
÷ When the TUNER or an external input is selected, A.P.S. function operates only when the volume is set to
zero or when MUTE is on.
÷ The character information display and level meter start
to blink.
÷ The display is switched each time the knob is turned,
and "ON" or "OFF" flashes.
2
Select "A.P.S. ON" or "A.P.S. OFF".
3
Press the SET key.
2 3 4 5
TUNED ST. AUTO
L
30 10 5 3 1 0 (-dB)
R
2 3 4 5
TUNED ST. AUTO
L
30 10 5 3 1 0 (-dB)
R
2 3 4 5
TUNED ST. AUTO
71 EN