Table of Contents
Advertisement
5 Continue steps 3 and 4 until all the characters are chosen for
Function of CD changers
the name.
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen
You can enter up to eight characters for each name
o in ieee changer, you can look for it by name and start
;
playing it.
6 Press the NAME.S button.
The disc name is stored and the disc name preset mode is
1 Press the DNPP button.
canceled.
if you make no entry in a 10-second period, the name will be
stored with the characters input so far.
* The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
Up to 10 CDs can be registered with this unit.
* Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
* If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
* Each source (CD, DISC-CH1,DISC-CH2} has its own memory in
which to store the disc names.
Discs that have been disc name preset with the CD player will
not have their disc name displayed when played on a CD
changer.
+ Disc names remain stored even if the reset button is pressed.
See: eee
"DNPP" will appear in the display, and the disc name preset
play mode is entered. The SBF indicator lights during the disc
name preset play mode.
The names of ali the discs in the disc changer will appear
successively tn the display for five seconds each. Discs whose
names have not been preset will appear as "No Name" in the
display.
* This function can only be used with the fallowing models:
KDC-CPS81/C711/C661/C51 1/C461/C7 10/C660/C810
* Discs in the disc changer that have never been played before
will appear as "NoAccess" when the disc names are displayed.
When you cannot identify a disc because of the "NoAccess"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name.
Also note that "NoAccess" will be displayed when a disc has not
been
loaded.
Rapid display (forward / reverse):
Press the DISC+ or DISC button.
Pressing the DISC+ button will rapidly display the preset
names/disc titles in order.
Pressing the DISC— button will rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you want to play
Press the DNPP button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) made will end.
To cancel DNPP mode:
Press the DNPP button for at least one second.
The disc name preset play (DNPP) mode will be canceled.
Advertisement
Table of Contents
