Direct Disc Search; Disc Name Preset Play (Dnpp) - Kenwood KDC-7060R Instruction Manual

Function of disc changers w ith rem ote control having
num ber/letter entry buttons (See page 8)
D irect D isc Search
Using the remote control, make direct input of the disc
number that you w ant to listen to.
1
Using the numeric buttons on the remote control, enter the
number of the disc that you w ant to listen to.
The selected disc number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode w ill automatically be cancelled.
N OTE
• Input "0" to select disc #10.
• If you enter more than tw o numbers all at once, a search w ill be
made only of the last number entered.
+
2
Press either the DISC or DISC
inputted is blinking.
The disc specified in step 1 starts playing.
Cancelling Direct Disc Search During Its Operation:
Press the 38 button.
Function of rem ote control w ith DNPP button (See page 8)
D isc N am e Preset Play (D N PP)
If you have preset the name of a disc that you w ant to listen
to in the disc changer, you can look for it by name and start
playing it.
1
Press the DNPP button on the remote control.
"DNP PLAY" w ill appear in the display, and the disc name
preset play mode is entered.
–
button w hilst the number
— 27 —
The preset names/disc titles of the disc in the disc changer to
w hich you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset w ill display "NO NAM E".
N OTE
• This function can only be used in disc changers that w ere
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
w ill appear as "NO ACCESS" w hen the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it
using the disc scan or a similar function to display the disc
name.
Also note that "NO DISC" w ill be displayed w hen a disc has not
been loaded.
Rapid display (forw ard / reverse):
+ –
Press the DISC or DISC
+
Pressing the DISC button w ill rapidly display the preset
names/disc titles in order.
–
Pressing the DISC button w ill rapidly display the preset
names/disc titles in reverse order.
2
When the name appears for the disc you w ant to play
Press the OK button.
The disc w hose name is displayed w ill be recalled, and the disc
name preset play (DNPP) mode w ill end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode w ill be cancelled.
button.