Dnpp (Disc Name Preset Play); Text/Title Scroll - Kenwood KDC-9023R Instruction Manual

Character type
Alphabet (Upper case/ Lower case)
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number button.
Example: If "DANCE" is entered.
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.

Text/Title Scroll

Scrolling the displayed CD text, MP3/WMA text, or MD title.
Press the [SCRL] button.
Button

DNPP (Disc Name Preset Play)

[2] ("A • a")
[3] ("1")
Selecting the CD displayed in the DNPS of the CDs set in the
[4] ("CHAR")
Disc changer.
1
Times pressed Forward / Reverse display
1
1
2
2
3
2
Canceling the DNPP mode
— 33 —
(Function of disc changers with remote)
Enter DNPP mode
Press the [DNPP] button on the remote.
When "DNPP" is displayed the DNPS display in order.
Press the [DISC–] or [DISC+] button.
When the disc you want is displayed
Press the [OK] button on the remote.
The disc being displayed is played.
Press the [DNPP] button on the remote.