Locking The Backpanel To The Unit - Kenwood KDC-9023R Instruction Manual

Locking the Backpanel to the unit

1
Refer to the Removing the Backpanel function of the section on
<Theft Deterrent Panel> (page 20) and remove the Backpanel.
2
Insert the panel lock screws into the holes at the sides of the
panel.
Accessory5
3
Reattach the Backpanel.
Never insert the panel lock screws (M2 X 1.5 mm) in any other screw
holes than the one specified. If you insert them in another hole, it will
contract and may cause damage to the mechanical parts inside the unit.
— 53 —