Default_Cwt; Hold_Reminder_Ring; Call_Back_Ring; Cfwd_Ring_Splash_Len - Linksys SPA2102-AU Provisioning Manual

# *** Ring Settings
Default_Ring[2]

Default_CWT[2]

Hold_Reminder_Ring[2]

Call_Back_Ring[2]

Cfwd_Ring_Splash_Len[2]

Cblk_Ring_Splash_Len[2]

VMWI_Ring_Splash_Len[2]

VMWI_Ring_Policy[2]

Becomes Available/New VM Arrives

Ring_On_No_New_VM[2]

# *** Call Progress Tones
Dial_Tone
Second_Dial_Tone
Outside_Dial_Tone
Prompt_Tone
Busy_Tone
Reorder_Tone
Off_Hook_Warning_Tone
Ring_Back_Tone
Confirm_Tone
SIT1_Tone
"985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ;
SIT2_Tone
"914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)" ;
SIT3_Tone
"914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ;
SIT4_Tone
"985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)" ;
MWI_Dial_Tone
Cfwd_Dial_Tone
Holding_Tone
Conference_Tone
Secure_Call_Indication_Tone
# *** Distinctive Ring Patterns
Ring1_Cadence
Ring2_Cadence
Ring3_Cadence
Ring4_Cadence
Ring5_Cadence
Ring6_Cadence
Ring7_Cadence
Ring8_Cadence
# *** Distinctive Call Waiting Tone Patterns
CWT1_Cadence
CWT2_Cadence
CWT3_Cadence
CWT4_Cadence
CWT5_Cadence
CWT6_Cadence
CWT7_Cadence
CWT8_Cadence
# *** Distinctive Ring/CWT Pattern Names
Linksys SPA Provisioning Guide
C-10
Appendix C
! "1" ; # options: 1/2/3/4/5/6/7/8
! "1" ; # options: 1/2/3/4/5/6/7/8
! "8" ; # options: 1/2/3/4/5/6/7/8/none
! "7" ; # options: 1/2/3/4/5/6/7/8
! "0" ;
! "0" ;
! ".5" ;
"New VM Available" ;
"No" ;
"350@-19,440@-19;10(*/0/1+2)" ;
"420@-19,520@-19;10(*/0/1+2)" ;
"420@-16;10(*/0/1)" ;
"520@-19,620@-19;10(*/0/1+2)" ;
"480@-19,620@-19;10(.5/.5/1+2)" ;
"480@-19,620@-19;10(.25/.25/1+2)" ;
"480@-10,620@0;10(.125/.125/1+2)" ;
"440@-19,480@-19;*(2/4/1+2)" ;
"600@-16;1(.25/.25/1)" ;
"350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)" ;
"350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)" ;
"600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)" ;
"350@-19;20(.1/.1/1,.1/9.7/1)" ;
"397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)" ;
"60(2/4)" ;
"60(.3/.2,1/.2,.3/4)" ;
"60(.8/.4,.8/4)" ;
"60(.4/.2,.3/.2,.8/4)" ;
"60(.2/.2,.2/.2,.2/.2,1/4)" ;
"60(.2/.4,.2/.4,.2/4)" ;
"60(.4/.2,.4/.2,.4/4)" ;
"60(0.25/9.75)" ;
"30(.3/9.7)" ;
"30(.1/.1, .1/9.7)" ;
"30(.1/.1, .3/.1, .1/9.3)" ;
"30(.1/.1,.1/.1,.1/9.5)" ;
"30(.3/.1,.1/.1,.3/9.1)" ;
"30(.1/.1,.3/.2,.3/9.1)" ;
"30(.3/.1,.3/.1,.1/9.1)" ;
"2.3(.3/2)" ;
Example SPA Configuration Profile
# options: New VM Available/New VM
Version 3.0