Internal Error Codes - Linksys SPA2102-AU Provisioning Manual

Chapter 4 Provisioning Field Reference
Table 4-4
Macro Name
PORT
PATH
ERR
UID1
UID2
ISCUST

Internal Error Codes

The SPA defines a number of internal error codes (X00–X99) to facilitate configuration in providing
finer control over the behavior of the unit under certain error conditions. They can be viewed in
Table
Table 4-5
Error Code
X00
X20
X40
X60
Version 3.0
Macro Expansion Variables (continued)
4-5.
Error Code Definitions
Description
Transport layer (or ICMP) error when sending a SIP request.
SIP request times out while waiting for a response.
General SIP protocol error (for example, unacceptable codec in SDP in 200
and ACK messages, or times out while waiting for ACK).
Dialed number invalid according to given dial plan.
Macro Expansion
Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
Request target file path, as obtained after parsing
resync or upgrade URL.
Result message of resync or upgrade attempt.
Only useful in generating result syslog messages.
The value is preserved in the UPGERR variable
in the case of upgrade attempts.
The contents of the Line 1 User_ID configuration
parameter (Firmware 2.0.11 and above).
The contents of the Line 2 User_ID configuration
parameter (Firmware 2.0.11 and above).
Value=1 if unit is customized, 0 otherwise;
customization status viewable on WebUI Info
page.
Linksys SPA Provisioning Guide
Internal Error Codes
4-9