Syslog Server; Where To Go From Here - Linksys SPA2102-AU Provisioning Manual

Chapter 1 Provisioning Linksys VoIP Devices

Syslog Server

If a syslog server is configured on the SPA (using the <Syslog_Server> or <Debug_Server> parameters),
the resync and upgrade operations log messages to the syslog server. A message can be generated at the
start of a remote file request (configuration profile or firmware load), and at the conclusion of the
operation (with either success or failure).
The logged messages themselves are configured in the following parameters:
For profile resync:
•
•
•
For firmware upgrades:
•
•
•
These parameters are macro expanded into the actual syslog messages.

Where to Go From Here

The following table summarizes the location of specific information in this document for completing
different provisioning tasks.
To Do This ...
Learn to work with Linksys provisioning scripts
and configuration profiles.
Review step-by-step procedures for using the
scripting language to create a configuration
profile.
Refer to the function and usage of each parameter
on the Provisioning tab of the administration web
server.
Look up the expansion for an acronyms use in this
document.
Define a term used in this document.
Version 3.0
Log_Resync_Request_Msg
Log_Resync_Success_Msg
Log_Resync_Failure_Msg
Log_Upgrade_Request_Msg
Log_Upgrade_Success_Msg
Log_Upgrade_Failure_Msg
Refer to ...
Chapter 2, "Creating Provisioning Scripts"
Chapter 3, "Provisioning Tutorial"
Chapter 4, "Provisioning Field Reference"
Appendix A, "Acronyms"
Appendix B, "Glossary"
Linksys SPA Provisioning Guide
Where to Go From Here
1-15