Table of Contents
Advertisement
Display Duration
Display Duration determines the length of time that the Port ID displays on the
screen after a port change. The table below explains the choices:
Choice
Always On
User Defined
Set Scan
Select the ports that are viewed under Auto Scan Mode and the duration of time
that they receive the KVM focus.
Setting
Scan Timer
Scan Mode
Displays the Port ID at all times.
Lets you select the amount of time (from 1–255 seconds). The
default is 3 seconds. A setting of 0 (zero) disables this function.
Determines how long the KVM focus dwells on each port as it
cycles through the selected ports in Auto Scan Mode (see F7
SCAN, p. 94). Key in a value from 1–255 seconds. The default is 5
seconds; a setting of 0 disables the Scan function.
Selects which computers will be accessed under Auto Scan Mode
(see F7 SCAN, p. 94). Choices are:
Personal—Only those ports that the user has set as personal. See
SET PERSONAL VIEW on p. 81.
Accessible—Only those ports that the user is permitted to access.
See Managing Port Access on p. 52.
Accessible + Powered—Only those ports that the user is
permitted to access and that have their attached computers
powered on.
The default is Accessible + Powered.
Chapter 3. Administrator Utility
Meaning
Function
59
Advertisement
Table of Contents
