Table of Contents
Advertisement
9452_book_1ATT
10/5/00
4
Check for dial tone.
After the batteries are charged, pick up the handset, press L, and
listen for a dial tone. Then press l. If you don't hear a dial tone, see
"IN CASE OF DIFFICULTY."
Wall Installation
1
Position the wall mount adapter on the base.
Align tabs on wall mount
adapter with holes on bottom
of base. Snap wall mount
adapter firmly into place.
2
Connect the power cord to the phone.
Use only the power cord supplied with this product. If you
need a replacement, call 1 800 222-3111.
3
Connect the telephone line cord(s). See illustrations on previous
page for connections. Use the short line cord instead of a long line
cord for the connection to the L1/L1+L2 phone jack.
3:17 PM
Page 7
INSTALLATION
Wall mount
adapter
7
Advertisement
Table of Contents
