Temporary Tone Dialing; Conference Calls - AT&T 9452 User Manual

9452_book_1ATT 10/5/00

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to
touch tone dialing during a call by pressing *. This is useful if you need to
send touch tone signals for access to telephone banking or long-distance
services.
1
Dial the number.
Press *. Buttons pressed after this send touch tone signals.
2
3 After you end the call, the phone automatically returns to dial pulse
(rotary) service.

Conference Calls

Three-Way Conference Calls
You can use both lines at the same time to set up a three-way conference
call from the handset.
1 Answer or make a call on one line.
Press H.
2
3
Press the other LINE button, and make or answer another call.
Press c to connect all parties. Both LINE buttons flash during a
4
conference call.
Press O to end the entire conference call.
5
NOTE: If you want to end the call with just one side of a conference, press
that LINE button, press O , and then press the other LINE button to speak
with the other party.
Four-Way Conference Calls
You can set up a four-way conference call with Line 1, Line 2, the handset,
and the base speakerphone.
1
Establish a conference call at the handset (see "Three-Way Conference
Calls" above).
Press L on the base.
2
Press l on the base.
3
Press c on the base to connect all parties.
4
3:17 PM Page 11
TELEPHONE OPERATION
AT THE HANDSET
11