Switching From Handset To Base Speakerphone; Call Timer; Headset Jack - AT&T 9452 User Manual

9452_book_1ATT 10/5/00
TELEPHONE OPERATION
AT THE HANDSET

Switching from Handset to Base Speakerphone

1 At the handset, make or answer a call on Line 1 or Line 2
— OR —
Establish a conference call.
Press H on the handset.
2
3
At the base, press the appropriate LINE button
— OR —
Press c to pick up a conference call.

Call Timer

While the handset or base is on a call, the screen displays the approximate
duration of the call.

Headset Jack

You can use this telephone hands-free when you install a 2.5 mm headset
(AT&T SKU# 24099), purchased separately.
Plug the headset into the jack located on the left side of the handset
(under the small rubber flap). Do not force the connection, but make sure
the plug fits securely.
12
3:17 PM Page 12
SCREEN WILL
BE UPDATED