Edit A Number/Name Stored The Directory - AT&T 1150 User Manual

4 When you finish entering the name,press
The screen displays
5 Enter the telephone number. Use
a correction. Press
—OR—
Press
this phone.
6 Press
and the current setting.
7 Press
wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose
NO) for a normal ringing pattern.
8 Press
in Step 7, a
Note: When memory is full the screen displays
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number/Name Stored in the Directory
1 Press
2 Press
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3 When the screen displays the number you want to edit,press
. Then press
4 Press
flashing cursor appears at the end of the name. Use
the dial pad keys to edit the name. Press
edit the number. Press
Ring setting.
5 Press
TELEPHONE DIRECTORY
to display the last number dialed from
or
or to change the setting. Choose
or
will be displayed with the directory entry.
(DIR). The screen displays
or to scroll alphabetically through entries
or
. The screen displays the name and number. The
to save the edited information.
.
to backspace and make
to store a pause in the dialing sequence.
. The screen displays
to confirm your selection. If you chose
until flashes.
to move to edit the Distinctive
or .
(for Yes) if you
(for
, an error
.
, and
to move on to
13