Telephone Operation; At The Base; Flash; Hold - AT&T 1150 User Manual

On steadily:
handset is charging in base
Flashing slowly:
handset or base speaker is in use or a call is on hold
Flashing quickly:
there is an incoming call

Hold

Press to put a call on hold. The IN USE light flashes. To return to
the call,press
NOTE: When Hold is active, pressing
you to the call

Mute

Press to prevent your caller from hearing you (you can hear your caller).
Press again to deactivate. MUTE light is on when Mute is activated.
TELEPHONE OPERAT I O N

Redial

Press to call the last number dialed at
the base (up to 32 digits).
.
.

AT THE BASE

unreviewed call
Access subscriber
use to adjust the
Make, Answer,
When calling,use
the base keypad to
memory location.
SPEAKER light is
on when call is
on handset will also return
Flashes when
you have
information.

Flash

services while
on a call.
Speaker
Volume
While on a call,
volume of what
you hear.
or End a Call
Press .
dial or enter a
connected.
9