AT&T 1150 User Manual page 7

I N S TA L L AT I O N
3 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12 hours
the first time.
4 Check for dial tone.
After the batteries are charged,pick up the handset and press
you should hear a dial tone.
5 Set the dial mode.
If you have touch tone service,the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial
mode.
• Press
• Press
currently selected mode.
• Press
• Press
• Press
6 Set the Time and Date.
• Press
.
• The month is flashing. Use
Press
• The day is flashing. Use
Press
• The hour is flashing. Use
Press
• The minute is flashing. Use
Press
• or
. Press
4
on the handset to enter programming mode.
or until the screen displays
. The current setting blinks.
to select or
, to save the displayed mode.
, then press
.
.
.
.
is flashing. Use
.
.
until
and to select the current month.
and to select the cor rect day.
and to select the cur rent hour.
and to select the cor rect minute.
and to choose between
and the
is displayed. Press
and
;