Removing The Bezel, Metal Feet, And Cover - Dell PowerEdge 2800 Conversion Manualline

Y1001bk0.book Page 9 Thursday, July 8, 2004 4:32 PM
• Installing the system in the rack
• Installing the cable-management arm
• Routing cables
• Installing the rack bezel
• Installing the rack doors

Removing the Bezel, Metal Feet, and Cover

To remove the bezel, orient the system as shown in Figure 1-2 and perform the following
steps:
Unlock the keylock. See Figure 1-2.
a
Rotate the keylock end of the bezel away from the front panel.
b
Unhook the other end of the bezel and pull the bezel away from the system.
c
Tower-to-Rack and Rack-to-Tower Conversion Guide
9