Removing The Bezel, Cover, And Front Panel; Figure 1-4. Removing The Front Bezel - Dell PowerEdge 6600 Installation Manual

Removing the Bezel, Cover, and Front Panel

This procedure is best performed with the system positioned as if it were in the rack (see
Figure 1-4).
Remove the bezel by pulling it away from the system front panel and set it aside.
1
F i g u r e 1 - 4 . R e m o v i n g t h e F r o n t B e z e l
back cover key lock
Remove the back cover:
2
Using the system key, unlock the back cover, if it is locked.
a
Loosen the thumbscrew that secures the back cover to the chassis (see Figure 1-5).
b
Slide the system cover backward and grasp the cover at both ends.
c
Carefully lift the cover away from the system.
d
Rac k - t o -To w e r C o n v e r s io n G u i d e
1-9