Removing The Metal Feet - Dell PowerEdge 2800 Conversion Manualline

Y1001bk0.book Page 11 Thursday, July 8, 2004 4:32 PM
Figure 1-3. Removing the Metal Feet
Remove the system cover and set it aside (see Figure 1-4):
Loosen the two thumbscrews on the front of the system.
a
Slide the system cover back and grasp the cover at both ends.
b
Carefully lift the cover away from the system and set it aside.
c
metal feet (4)
Tower-to-Rack and Rack-to-Tower Conversion Guide
hex-head Phillips
screws (4)
11