Table of Contents
Advertisement
SATA Mode
6.
Please change SATA Mode from AHCI Mode to RAID Mode
SATA Mode
7.
Please change SATA SW RAID Option Mode from Intel RAID to LSI RAID
SATA SW RAID Option
8.
Please press F10 to save the setting before exit from BIOS Setup.
Entering LSI onboard SATA RAID BIOS Utility
Please press Ctrl-M when you see the RAID BIOS during POST.
Loading Factory default setting
1.
Select Objects from Management menu.
2.
Select Adapter from Objects. The selectable adapter will be listed.
3.
Press Enter on the adapter and the adapter setting will be shown on the screen.
You can change the setting from this menu.
4.
Select Factory Default and YES to load the default settings.
5.
Exit the configuration utility and press <Ctrl> + <Alt> + <Del> to reboot the
server.
Creating a RAID Volume
1.
Select Configuration from Management Menu.
2.
Select New Configuration from the Configuration menu and select YES to continue.
An array selection window displays the devices connected to the current
controller.
3.
Press the arrow keys to choose specific physical drives and press spacebar to
associate the selected drive with the current array. The indicator for selected
drive change from READY to ONLINE
4.
After adding 2 drives to current array, press <Enter> to finish creating current
array.
5.
Press Enter again to select array to configure.
6.
Press spacebar to select the array and press <F10> to configure the logical drive.
7.
The default RAID level for 2 disk drives is RAID1. Just select Accept to use the
default setting and press <Enter> to return to the ARRAY SELECTION MENU.
8.
Press <Enter> to end the array configuration.
9.
Select YES to Save Configuration and press any key to return to the Configure
menu.
Initializing a RAID Volume
1.
Press <Esc> to return to the Management Menu.
[AHCI Mode]
[RAID Mode]
[LSI RAID]
69
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
