Initializing a RAID Volume
1.
After you create the array by pressing <C>, it initializes the RAID Volume
automatically.
Assigning a Hot Spare Drive
1.
Select SAS3041E and press <Enter>.
2.
Select RAID Properties and press <Enter>.
3.
Select View Existing Array and press <Enter>.
4.
Select Manage Array and press <Enter>.
5.
Select Manage Hot Spares and press <Enter>.
6.
Move selection to Hot Spr and press <+> .
7.
Press <C> to commit changes.
8.
Select Save changes then exit this menu and press <Enter>.
9.
Press <ESC> 4 times and select Exit the configuration Utility and Reboot. Press
<Enter>.
73