Maytag MGR5755QDB - 30 Ing Gas Range Use & Care Manual page 17

Gas - precision touch control 500
Table of Contents

Advertisement

Available languages

Available languages

5. Press the More+ or Less- pad to scroll through the sdf-
cieaning settings.
CL-H (Heavy Soft, 4 hours:}
CL-M (Medium soft, 3 hours:}
CL-L (Light Soft, 2 hours:}
Choosing the soft bvd of the oven automatically programs
the sdf-cbaning
time.
6. After four seconds, CLEAN, DELAY and LOCK wfli appear
in the dispiay to show that the oven is set for a ddayed
dean operation. The dday time is dispiayed.
During
the Se_f-Clean
Cycle
When LOCK shows in the dispiay, the door cannot be opened.
To prevent damage to the door, do not force the door open
when LOCK is dispiayed.
Smoke
and Sin!!ms
You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal and will lessen in
time,
Smoke may also occur if the oven is heavily soiled or if a
broiler pan was left in the oven.
Sounds
As the oven heats, you may hear sounds of metal parts
expanding and contracting. This is normal and will not
damage the oven.
Jf the oven
has already
been
set for a clean
cycle
and you wish
to set a delay:
1. Press the Delay pad.
° DELAY flashes.
° 00:00 will appear in the display.
2. Press the More+ or Less- pad to set the
More+
amount of time you want to delay the cycb.
After four seconds, CLEAN, DELAY and LOCK
Less-
will appear in the display to show that the
................................
oven is set for a delayed clean operation. The
delay time is displayed.
When the Self-Clean
cycle starts:
° DELAY will turn off.
° The clean time will appear in the display.
To canoe!
the Serf-Clean
cycle:
Press the CANCEL pad.
° All words disappear from the display.
° All functions are canceled.
° The time of day appears in the display.
After
Seff-C_eaning
About one hour after the end of the self-dean cycle, LOCK
will turn off. The door can then be opened.
Some soil may leave a light gray, powdery ash. Remove
it with a damp cloth. If soil remains after wiping, that means
the clean cycle was not long enough. The soil will be re-
moved during the next clean cycb.
if oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack supports
with a small amount of vegetable oil to make them easier to
move.
Fine lines
may appear
in the porcelain
becaase
it went
throagh
heating
and cooling,
This is normal and will not
affect performance.
A white
discoloration
may appear
after cleaning
if acidic
or sugary
foods
were
not wiped
up before
the self=clean
cycle.
This discoloration
is normal and will not affect perfor-
mance.
If the oven door is left open, "door" wiii flash in the
display and a signal will beep until the door is closed
and the Clean pad is pressed again.
If more than five seconds elapse between pressing the
Clean pad and the More+ or Less- pad, the program will
automatically return to the previous display.
The oven door will be damaged if the oven door is
forced to open when LOCK is still displayed.
16

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents