Dell V725W Manual page 37

Loading paper and original documents
Load up to
50 transparencies
10 iron-on transfers
25 index cards, photo papers, or postcards
Make sure
• The rough side of the transparencies faces down.
•
You load letter‑ or A4‑size transparencies.
•
You remove any paper backing sheets from the transparencies before
loading.
•
If the transparencies have a removable strip, then each strip faces down.
• The paper guides rest against the left, right, and bottom edges of the
transparencies.
Note: Transparencies require more drying time. Remove each transparency
as it exits, and allow it to dry to avoid ink smudging.
• You follow the loading instructions that came with the iron-on transfers.
•
The print side of the transfers faces down.
•
The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
•
The thickness does not exceed 0.025 inches (0.635 mm).
• The print side of the photo paper faces down.
• You load the photo paper in the center of the tray, as indicated by the
4 x 6‑inch photo paper outline.
• The paper guides rest against the left, right, and bottom edges of the
paper.
Note: For best results, allow photos to dry at least 24 hours before
stacking, displaying, or storing.
37