Software Did Not Install - Dell V725W Manual

Troubleshooting
3
To confirm the setting, press the left or right arrow button to scroll to Yes, and then press
Installation screen did not appear during installation
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
L
AUNCH THE PRINTER
For Windows users
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
3
Press Enter, or click OK.
4
Click Install, and then follow the instructions on the computer screen.
For Macintosh users
1
From the Finder desktop, click the CD icon.
2
Double-click the software installer package, and then follow the instructions on the computer screen.

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a
printer option when sending a print job, then try uninstalling and reinstalling the software.
Before you reinstall the software, do the following:
M
AKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS
T
EMPORARILY DISABLE SECURITY PROGRAMS IN
C USB
HECK THE CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a
defective port.
R
ECONNECT THE PRINTER POWER SUPPLY
1
Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
2
Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
CD
MANUALLY
.
W
INDOWS BEFORE INSTALLING THE SOFTWARE
for three seconds to turn off the printer.
129
.