Installing The Printer On An Ethernet Network - Dell V725W Manual

Networking
•
CA certificate
EAP‑TLS
•
RADIUS user name
•
CA certificate
•
Signed certificate
EAP‑TTLS
•
Appropriate inner authentication
•
RADIUS user name
•
RADIUS password
• CA certificate
Configuring 802.1X Authentication
The information to complete is dependent on the 802.1X security mechanism you select. Some require user names,
passwords, and/or certificates. If your network contains multiple access points with different modes of authentication,
then you can select and configure more than one authentication mechanism.
1
From the Configure 802.1X Authentication dialog, select an authentication mechanism.
If you have selected
EAP‑MD5, LEAP, or
MSCHAPv2
PEAP or EAP‑TTLS
EAP‑TLS
2
Type the necessary information that the authentication server requires.
3
Click OK, and then follow the instructions on the computer screen.

Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network
Make sure you have the following information before you begin:
•
A valid, unique IP address for the printer to use
•
The gateway for the network
• The network mask of the network where the printer will be used
•
The name of the domain where the printer will reside
Do this
Proceed to the next step.
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
locate the certificate file.
a
Click Install Signed Certificate, and then type the path to the signed certificate, or click
Browse to locate the certificate file.
b
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse
to locate the certificate file.
104