Dell V525W Manual page 123

Troubleshooting
S
ELECT YOUR PRINTER FROM THE
Note: This solution applies to Macintosh users only.
1
With a document open, choose File > Print.
2
From the printer pop-up menu, choose your printer, and then click Print.
If your printer does not appear in the Printer list, then choose Add Printer. From the list of printers in the Default
tab, select your printer, and then click Add.
If your printer does not appear in the list, then try either of the following:
• For a USB-connected printer, remove and then reconnect the USB cable.
•
For a printer that is wirelessly connected, see the Wireless troubleshooting section.
M
AKE SURE THE PRINT JOB IS NOT PAUSED
M
AKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER
R
ECONNECT THE PRINTER POWER SUPPLY
1
Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
2
Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3
After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall
outlet.
4
Turn on the printer.
R
EMOVE AND RECONNECT THE
C USB
HECK THE CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a
defective port.
R
EMOVE AND REINSTALL THE PRINTER SOFTWARE
P
RINT DIALOG BEFORE SENDING THE PRINT JOB
USB
CABLE CONNECTED TO YOUR PRINTER
.
for three seconds to turn off the printer.
123