Paper] - Konica Minolta bizhub 36 User Manual

4.9 [Print Settings]
4.9.3

[Paper]

Specify the paper to be used unless you specify an alternative.
%
Press the Utility/Counter key ö [Admin Settings] ö [Print Settings] ö [Paper].
Settings
[Default Paper]
[Measurement Unit Setting]
Factory default
[Paper Size]
[Custom Size]
[Paper Type]
[Measurement Unit Setting]
bizhub 42/36
[Paper Size] Select the paper size.
[Custom Size] Specify odd size paper.
[Width]: Specifies the paper width. (3.55 to 11.69
inches (90 to 297mm))
[Length]: Specifies the paper length. (5.50 to
14.00 inches (140 to 356 mm))
These settings can be specified if [Paper Size] is
set to [Custom Size].
[Paper Type] Select the paper type.
Select the measurement units.
[Letter] ([A4])
This value varies depending on the area.
[Plain Paper]
This value varies depending on the area.
4
4-23