Hdd Settings]; [Overwrite All Data] - Konica Minolta bizhub 36 User Manual

4.12 [Security Settings]
4.12.4

[HDD Settings]

Configure hard disk settings.
%
Press the Utility/Counter key ö [Admin Settings] ö [Security Settings] ö [HDD Settings].
Settings
[Check HDD Capacity]

[Overwrite All Data]

[Overwrite All Data]
This function overwrites and deletes all data in the total capacity of the HDD.
0 This function is available when disposing of this machine. Before performing this function, be sure to
contact your service representative.
0 While overwriting and deleting data, do not turn the Power Switch off and on.
%
To overwrite and delete data, select the HDD overwrite method, press [Execute], and then press [OK].
Overwrite and delete processing is performed after this machine has been rebooted.
bizhub 42/36
Check the total capacity of the hard disk, the amount of space used and
the amount of space available.
Delete all data on the hard disk by overwriting it.
For details, refer to page 4-40.
4
4-40