Dell 5330dn - Workgroup Laser Printer B/W User Manual page 22

message, or receive
additional bytes of data
from the computer.
NOTE: Wait Timeout is
only available when
you use PostScript
emulation. This menu
value has no effect on
PCL emulation print
jobs.
Print
Recovery
Auto CR Allows you to append
the required carriage
return to each line
feed.
Date & Time See "Setting the time
(Only if HDD and date".
is installed)
DayLight See "Setting Daylight
Saving Savings Time".
(Only if HDD
is installed)
Quality
Use this menu selection to change settings that affect print quality and save toner.
When the timer expires, any
partially formatted page still in
the printer is printed, and other
input ports are examined to see if
data exists.
90* is the default setting.
Auto Continue Determines whether or not the
printer continues printing when it
On
detects the paper unmatched to
your paper setting.
Off
On: If the paper mismatch
occurs, an error message
will display. The printer
goes offline for 30 seconds,
then automatically clears
the message and continues
printing.
Off: If a paper mismatch
occurs, an error message
remains on the display,
and the printer remains
off-line until you insert the
correct paper.
Jam Recovery Specifies whether the printer
reprints jammed pages.
On
On: Printer reprints
Off
jammed pages.
Off: Printer does not
reprint jammed pages.
LF Refers to the following samples:
LF+CR
Manual
Auto
Off