Default Source; Bin Setup - Dell 5330dn - Workgroup Laser Printer B/W User Manual

Default Source

Menu Purpose:
selection:
Default Source Identifies the default paper
source.
Tray Behavior
Menu Purpose:
selection:
Tray Linking When you select any other
value except Auto from
Paper Size/Type and the
selected tray is empty, you
can set the printer
automatically to print from
other trays.
Substitute Size Substitutes the specified
paper size if the requested
size is not loaded.
Configure MPF Determines when the
printer selects paper loaded
in the multi-purpose
feeder.

Bin Setup

NOTE: Bin Setup is only displayed when at least one optional output expander is installed.
Menu Purpose:
selection:
Values:
If you loaded the same size
Tray <x>
and type of paper in two
paper sources (and the
MP Feeder
Paper Size and Paper Type
menu items are correctly
set), the trays are
automatically linked. When
one paper source is empty,
paper automatically feeds
from the next linked source.
Values:
On If this menu item is set to
Off, the printer doesn't
Off
work until you insert paper
into the specified tray.
Nearest Size Substitute size set to Off
means no substitution is
Off
allowed for the requested
paper size. See
Size".
Bypass Bypass: Paper
loaded in the multi-
Tray Mode
purpose feeder is
used first when
printing a job, even
though there is
paper in other trays.
Tray Mode: Paper
loaded in the multi-
purpose feeder is
used last when
printing a job.
Values:
"Substitute