Dell 5330dn - Workgroup Laser Printer B/W User Manual page 171

Mono laser printer
Hide thumbs Also See for 5330dn - Workgroup Laser Printer B/W:
Table of Contents

Advertisement

Condition
Light or faded print
Toner specks
Dropouts
Vertical lines
Gray background
Suggested solutions
If a vertical white streak or faded area appears on the
page:
The toner supply is low. You may be able to
temporarily extend the toner cartridge life. See
"Redistributing
Toner". If this does not improve
the print quality, install a new toner cartridge.
The paper may not meet paper specifications; for
example, the paper is too moist or too rough.
See
"Paper
Specifications".
If the entire page is light, the print resolution
setting is too low or the toner save mode is on.
Adjust the print resolution and turn the toner
save mode off. See
A combination of faded or smeared defects may
indicate that the toner cartridge needs cleaning.
See
"Cleaning the
The surface of the LSU part inside the printer
may be dirty. Clean the LSU (see
Interior").
The paper may not meet specifications; for
example, the paper is too moist or too rough.
See
"Paper
Specifications".
The transfer roller may be dirty. Clean the inside
of your printer. See
The paper path may need cleaning. See
"Cleaning the
Interior".
If faded areas, generally rounded, occur randomly on
the page:
A single sheet of paper may be defective. Try
reprinting the job.
The moisture content of the paper is uneven or
the paper has moist spots on its surface. Try a
different brand of paper. See
Specifications".
The paper lot is bad. The manufacturing process
can cause some areas to reject toner. Try a
different kind or brand of paper.
The toner cartridge may be defective. See
"Vertical repetitive defects"
If these steps do not correct the problems,
contact a service representative.
If black vertical streaks appear on the page, the
drum inside the toner cartridge has probably
been scratched. Install a new toner cartridge.
See
"Replacing the Toner
If white vertical streaks appear on the page, the
surface of the LSU part inside the printer may be
dirty. Clean the LSU (see
If the amount of background shading becomes
unacceptable:
Change to lighter weight pages. See
"Graphic
Tab".
Interior".
"Cleaning the
"Cleaning the
Interior".
"Paper
on the next page.
Cartridge".
"Cleaning the
Interior").
"Paper

Advertisement

Table of Contents
loading

Table of Contents