Common Linux Problems - Dell 5330dn - Workgroup Laser Printer B/W User Manual

"Exception OE",
"Spool32", or
"Illegal Operation"
message appears.
"Fail To Print" or These messages may appear during printing. Wait until the
"A printer timeout
machine finishes printing. If the message appears in standby
error occurred." mode or after printing has been completed, check the
message appears. connection and/or whether an error has occurred.
NOTE: Refer to Microsoft Windows 2000/XP User's Guide that came with your PC for further information on
Windows error messages.
Common Postscript (PS) Problems
The following situations are PS language specific and may occur when several printer languages are being used.
NOTE: To receive a printed or screen displayed message when PS errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
Problem Possible Cause
PostScript file The PostScript option may not
can not be be installed.
printed.
Limit Check The print job may be too
Error complex.
A PS error page Print job may not be PS.
prints.
The optional The printer driver has not
tray 2 is not been configured to recognize
selected in the the optional tray 2.
driver.

Common Linux Problems

Condition Suggested solutions
The printer
doesn't print.
Ensure that the printer driver is installed in your system.
Open Unified Driver Configurator and switch to the Printers
tab in Printers configuration window to look at the list of
available printers. Make sure that your machine is displayed
Solution
Print a configuration page and
verify that the PS version is
available for printing.
Reduce the complexity of the
page or try adjusting the print
quality settings.
Or, expand the memory capacity.
Ensure that the print job is a PS
job. Check to see whether the
software application expected a
setup or PS header file to be
sent to the printer.
Open the PostScript driver
properties and set the Option
Tray item of the Device option
to Installed.