Dell 5330dn - Workgroup Laser Printer B/W User Manual page 169

Condition Possible cause
The printer The printer is not receiving
does not print. power.
The printer is not selected as
the default printer.
Check the printer for the
following:
The connection cable between
the computer and the printer
is not connected properly.
The connection cable between
the computer and the printer
is defective.
The printer may be configured
incorrectly.
The printer driver may be
incorrectly installed.
The printer is malfunctioning.
The printer The paper source selection in
selects print
the printer properties may be
materials from incorrect.
the wrong
paper source.
A print job is The job may be very complex.
extremely slow.
Suggested solutions
Check the power cord
connections. Check the power
switch and the power source.
Select DELL 5330dn Mono
Laser Printer as your default
printer in Windows.
The front or rear door is
not closed.
Paper is jammed.
No paper is loaded.
The toner cartridge is not
installed.
If a printer system error occurs,
contact your service
representative.
Disconnect the printer cable and
reconnect it.
If possible, attach the cable to
another computer that is working
properly and print a job. You can
also try using a different printer
cable.
Check the printer properties to
ensure that all of the print
settings are correct.
Remove the printer driver and
"Uninstalling
then reinstall it. See
Software" and "Installing
Software in Windows"
respectively.
Check the display message on
the operator panel to see if the
printer is indicating a system
error.
For many software applications,
the paper source selection is
found under the Paper tab
within the printer properties.
Select the correct paper source.
See "Paper Tab".
Reduce the complexity of the
page or try adjusting the print
quality settings.
The maximum print speed of