Graphic Tab - Dell 5330dn - Workgroup Laser Printer B/W User Manual

Ensure that Source is set to the corresponding paper tray.
Source
The MP Feeder source is used when printing to special
materials. See
If the paper source is set to Auto Selection, the printer
automatically picks up print materials from the Multi-
purpose Feeder first and then the paper tray.
Ensure that Type is set to Printer Default. If you load a
different type of print material, select the corresponding
Type
paper type. For more information about print materials, refer
to
This property allows you to print the first page using a
different paper type from the rest of the document. You can
First Page
select the paper source specifically for the first page.
For example, load thick stock for the first page into the
Multi-purpose Feeder, and plain paper into Tray n. Then,
select Tray in the Source option and Multi-purpose
Feeder in the First page option.
Optional Output Bin 1 allows you to choose the output
destination for the printed document. But, paper with a
Output bin
smaller size of width of 3"(76.2mm) and length of
5.82"(148.5mm) are automatically printed out in the
Standard Bin.
Allows you to automatically or manually scale your print job
on a page. Choose from Same as input size, Fit to Page
Output size
or Reduce /Enlarge.
For details, see
and

Graphic Tab

To adjust the print quality for your specific printing needs,use the following graphic options: Click the Graphic tab to
display the properties shown below.
"Printing on special print
"Print Media Guidelines".
"Printing a Reduced or Enlarged Document"
"Fitting Your Document to a Selected Paper
materials".
Size".