Cisco Mds 9124 Switch; Cisco Mds 9140 Switch - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Cisco MDS 9100 Series Multilayer Fabric Switches
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Cisco MDS 9124 Switch

The Cisco MDS 9124 Multilayer Fabric Switch has a total of 24 1-, 2-, and 4-Gbps autosensing Fibre
Channel ports. The Cisco MDS 9124 Switch features On-Demand Port Licensing. You can activate
licensing in 8-port increments with each on-demand port activation license for up to a total of 24 ports.
By default, the first 8 ports are licensed. Two additional licenses are required to license all 24 ports. See
Figure
Figure 1-2
Cisco MDS 9124 Multilayer Fabric Switch supports N port identifier virtualization (NPIV). NPIV can
assign multiple FC IDs to a single N port. This feature allows multiple applications on the N port to use
different identifiers and allows access control, zoning, and port security at the application level
For a list of features supported on the Cisco MDS 9124 Switch, see the Cisco MDS 9000 Family Fabric
Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide.

Cisco MDS 9140 Switch

The Cisco MDS 9140 Switch has a total of 40 1/2-Gbps autosensing, optionally configurable ports. The
first eight ports on the left-hand side are the bandwidth-optimized ports. They are delineated by a white
border. The remaining eight groups of four ports each are the host-optimized port groups. See
Figure 1-3
Cisco MDS 9100 Series Hardware Installation Guide
1-4
1-2.
Cisco MDS 9124 Switch
Cisco MDS 9140 Switch
Chapter 1 Product Overview
Figure 1-3.
OL-17951-02