Installing A Fan Module - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Chapter 2 Installing the Cisco MDS 9100 Series
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Installing a Fan Module

To install a new fan module, follow these steps:
Position the fan module with the LED oriented away from the back of the switch.
Step 1
fan module for the Cisco MDS 9120 Switch and the Cisco MDS 9140 Switch.
module for the Cisco MDS 9134 Switch.
Step 2 Slide the fan module into the switch until it clicks into place.
Figure 2-25
Figure 2-26
Figure 2-26
OL-17951-02
Cisco MDS 9100 Series Fan Module
Fan module LED
shows the Cisco MDS 9134 fan module.
Cisco MDS 9134 Fan Module
Removing and Installing Components
Cisco MDS 9100 Series Hardware Installation Guide
Figure 2-25 shows the
Figure 2-26 shows the fan
2-33