Snmp Cli Usage - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

1
Loading Brocade MIBs
RFC1213-MIB
MIB-II
RFC1155-SMI
SNMPv2-SMI
SMNPv2-TC
SNMPv2-CONF
NOTE
FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib.
FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the
FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system.
The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP
management system. The FE_EXP.mib was listed in the experimental OID section. The
FE_RFC2837.mib has subsequently been ratified by the standards organizations.|
All versions of Fabric OS support SNMPv1. Fabric v2.6.x and v3.2.x partially support SNMPv2. Fabric
OS v4.4.0 and v5.0.1 support SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS version 5.3.0 supports
the FCIP MIB and ifXtable.
FIGURE 5

SNMP CLI usage

An example of the SNMPv3 User/Traps configuration is provided below.
8
Select one
FA_v2_2.mib
FCMGMT-MIB
FOS 2.6.x
FA_v3_0.mib
FCMGMT-MIB
FOS 3.x, 4.x, 5.x
BRCD_v5_0.mib
Brocade-REG-MIB
Brocade-TC
FOS 2.6.x, 3.x, 4.x, 5.x
INET-ADDRESS-MIB
snmpUsmMIB
User-based Security Model
RFC2571
SNMP-FRAMEWORK-MIB
fcip.mib
Legend
brcdfcip.mib
Standard MIB File
ISCSI_RFC4544.mib
Brocade SNMP MIB Dependencies and Advised Installation Order
Select one or both
FE_EXP.mib
FCFABRIC-ELEMENT-MIB
FE_RFC2837.mib
FIBRE-CHANNEL-FE-MIB
FOS 3.1.x, 4.x, 5.x
FICON_v5_0.mib
FICON-MIB
FOS 4.x, 5.x
SW_v5_5.mib
FOS 2.6.x, 3.x, 4.x, 5.x
ENTITY_RFC2737.mib
ENTITY-MIB
FOS 4.x, 5.x
Dependency
Module name
HA_v5_1.mib
HA-MIB
FOS 4.x, v5.x
Brocade MIB
Module name
FOS supported
Fabric OS MIB Reference
53-1001156-01