Mib Loading Order - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

TABLE 2
Firmware
Fabric OS v2.6.2 and previous
Fabric OS v3.2.0 and previous
Fabric OS v4.2.0 and previous
Fabric OS v4.4.0
Fabric OS v5.x
Fabric OS v6.0.0
Fabric OS v6.1.0
Fabric OS v6.2.0
1.
2.
RFC 3414.
3.

MIB Loading Order

Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the
IMPORTS section near the top of the MIB. When loading the Brocade MIBs, refer to
ensure any MIB dependencies are loading in the correct order.
Fabric OS MIB Reference
53-1001156-01
Fabric OS Supported SNMP Versions
The corresponding Fabric OS has SNMPv2 capabilities, but it is not officially supported by Brocade.
Fabric OS v4.4.0 and v5.x support SNMPv3-USM MIB (snmpUsmMIB), which is available as
SNMPv2 is supported from Fabric OS v5.0.4 and higher, but SNMP v2 traps are not supported.
SNMPv1 SNMPv2
1
Yes No
1
Yes No
1
Yes No
1
Yes No
3
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Loading Brocade MIBs
SNMPv3
No
No
No
2
Yes
2
Yes
Yes
Yes
Yes
Figure 5
1
to
7