Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 26

1
Loading Brocade MIBs
3. Set the security level.
4. In the Manager (SNMP Browser), create a user fa_adm with Authentication protocol as MD5,
10
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
Trap Recipient's IP address : [0.0.0.0]
Committing configuration...done.
switch:admin>
switch:admin> snmpconfig --show snmpv3
SNMPv3 USM configuration:
User 1 (rw): fa_adm
Auth Protocol: MD5
Priv Protocol: DES
User 2 (rw): snmpadmin2
Auth Protocol: noAuth
Priv Protocol: noPriv
User 3 (rw): snmpadmin3
Auth Protocol: noAuth
Priv Protocol: noPriv
User 4 (ro): snmpuser1
Auth Protocol: noAuth
Priv Protocol: noPriv
User 5 (ro): snmpuser2
Auth Protocol: noAuth
Priv Protocol: noPriv
User 6 (ro): snmpuser3
Auth Protocol: noAuth
Priv Protocol: noPriv
SNMPv3 Trap configuration:
Trap Entry 1: 10.202.95.70
Trap Port: 65000
Trap User: fa_adm
Trap recipient Severity level: 5
Trap Entry 2: No trap recipient configured yet
Trap Entry 3: No trap recipient configured yet
Trap Entry 4: No trap recipient configured yet
Trap Entry 5: No trap recipient configured yet
Trap Entry 6: No trap recipient configured yet
switch:admin>
switch:admin> snmpconfig --set secLevel
Select SNMP GET Security Level
(0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 =
No Access): (0..3) [0] 2
Select SNMP SET Security Level
(0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 =
No Access): (2..3) [2] 2
switch:admin> snmpconfig --show secLevel
GET security level = 2, SET level = 2
SNMP GET Security Level: Authentication and Privacy
SNMP SET Security Level: Authentication and Privacy
Privacy protocol as DES, set the password and set the trap port as 65000. (Same values are
set as in the switch SNMPv3 configuration.)
Fabric OS MIB Reference
53-1001156-01