The switch configuration is corrupt
Action:
An error was made when saving the switch configuration. Reboot the switch and reload the factory
settings. This action clears all settings and restores them to the initial values that were present when the
switch was purchased. See the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command
Reference Guide for more information.
After reloading the factory settings, reconfigure the switch settings.
XFP transceiver port is disabled
Action:
Verify the XFP transceiver was purchased from HP. To purchase an XFP transceiver from HP, contact an
authorized HP reseller.
Troubleshooting 59