HP 438031-B21 - 1:10Gb Ethernet BL-c Switch User Manual page 33

Setting
Secondary DNS server
address
Default domain name
Management
network/mask
Switch software image on
next boot
Switch Config file on next
boot
Display Hostname
(sysName) in CLI prompt
Idle timeout
Telnet status
Telnet port
Web status
Web port
Backpressure
Port state
Port speed/duplex
Flow control
STP
Bridge Max Age
Bridge Hello Time
Bridge Forward Delay
Bridge Priority
MAC Address Aging Time
Port Priority
Path Cost
Static VLAN Entry
Port VID
Port Trunking
Port Trunking Load Sharing
Algorithm
Port Mirroring-Mirror Status Disabled
Value
0.0.0.0
None
0.0.0.0 / 0.0.0.0
Image 1
Active
Disabled
5 minutes
Enabled
23
Enabled
80
Disabled
Enabled
Auto
Receive & transmit
STG 1—Enabled with default VLAN (VID=1)
Port 1-16 (server ports) STP—Disabled at port level
STG 2-16—Disabled
20 seconds
2 seconds
15 seconds
32768
300 seconds
128
4
Default VLAN (VID = 1)
1 for all ports
Trunk group 1, enabled with port 17 and 18
The algorithm selects the following as forwarding ports for forwarding traffic:
1 For forwarding IP Packets—modulus of XOR of last 3 bits of source and last 3
bits of Destination IP address
2 For forwarding non-IP packets—modulus of XOR of last 3 bits of source and
last 3 bits of Destination MAC address
3 For forwarding broadcast, multicast packets, and unknown unicast packets—
the lowest active port number in the trunk group
Technical specifications 33