Power Property Page - Intel WPC2011NA - Pro/wireless 2011 Pccard Wireless Nic Product Reference Manual

Network Control Panel Applet (NCPA)
A.2.2 Power Property Page
A - 6
Use the Power
consumption in the ESS and IBSS operating modes.
The adapter has two power consumption modes,
Continuous Access Mode (CAM) and Power Save Poll
(PSP) mode. CAM yields the best performance but uses
the most power. CAM is the preferred mode for systems
running on AC power. PSP saves significant amounts of
power over CAM. PSP is the preferred mode for systems
running on battery power.
Set the slider to the far right to keep the adapter in CAM
or set the slider to a PSP performance index (1 to 5).
Each mode is described underneath the sliding scale.
Disable Power Management in WLAN Monitor to use
the settings in Network Control Panel Applet (NCPA).
Set the adapter power consumption mode and click
Wireless LAN Adapter Product Reference Guide
property page to control adapter power
OK.