Table of Contents
Advertisement
Network Control Panel Applet (NCPA)
If an access code is required, click the
Access Code
button to display the
Enable 128-bit Encryption
dialog
box. Enter the access code in the three fields provided
and click OK. Once the access code is entered, the
Access Code button is no longer displayed on the
Encryption property page and the access code is stored.
Once 128-bit Encryption is enabled, select
128-bit
Encryption from the
Encryption Algorithm
pull-down
menu. Enter the 26 Hex digit Encryption key by
spreading the 26 Hex digits across the six fields
provided. Click
OK
to save and implement the
Encryption key data.
Click
Reset Keys
to clear the entries in the Shared
Encryption Key fields.
Wireless LAN Adapter Product Reference Guide
A - 11
Advertisement
Table of Contents
Troubleshooting
