Table of Contents
Advertisement
2.
Using the Down arrow key, highlight Yes and then press Enter to
The display reverts to the Enter PIN screen.
NOTE
When the MFP control panel is left inactive for a prescribed length of time, the
display automatically reverts to the Enter PIN screen if Access Control is
enabled.
O
-
PERATION TIME
OUT
When the MFP control panel is left inactive for a prescribed length of time (Operation Time-
out), the display automatically reverts to the idle screen if Access Control is disabled.
If an error state occurs, Operation Time-out is disabled.
After Operation Time-out, the display automatically reverts to the Enter PIN screen if
Access Control is enabled.
The length of the Operation Time-out depends on the setting in Menu Mode > Admin
Setup > System Setup > Return to Standby Time.
Access control > 59
confirm.
Advertisement
Table of Contents
