Reducing The Adf Scan Noise; Settings For Reading Out Original Characters (Ocr) - Oki ES9466 MFP Scanning Manual

3.USEFUL FUNCTIONS
 Reducing the ADF scan noise
You can set the noise reduction level for scanning originals with the ADF. Press [Scan Setting] and then set the noise
reduction level in [ADF Scan Noise Reduction]. Use this function if scan noise is conspicuous due to fine dust at
scanning.
 [None] — Select this option to disable the reduction function.
 [Low, Middle, High] — Select this option to use the reduction function. Fine lines other than scan noise may
become faint if you set the reduction level higher.
 Settings for reading out original characters (OCR)
Set the languages and auto rotation when you enable OCR.
This screen is displayed only when the OCR Enabler is supported.
 Set the languages for OCR
Set the languages for the characters OCR reads out. Press [Scan Setting] and then make the following settings in
[Language].
 [1st] — Set the language for the characters OCR reads out.
 [2nd] — If the original characters are written in multiple kinds of languages, set the second language for the
characters OCR reads out.
 Set auto rotation for OCR
Decide whether or not to correct the orientation of your scans. Press [Scan Setting] and then set [Auto Rotation].
 [On]— Enable auto rotation for OCR.
 [Off] — Disable auto rotation for OCR. If you disable it, OCR may not be able to read out characters correctly.
46 Changing Scan Settings