Chapter 3
Installing the Switch
Attaching the Cable Guide
Note
78-6286-05
Figure 3-10 Mounting the Catalyst 2948G-GE-TX Switch In a Rack
1
1
Phillips machine screws
We recommend attaching the cable guide to the left or right bracket to prevent the
cables from obscuring the front panel of the switch and the other devices installed
in the rack. Use the supplied black screw, as shown in
cable guide to the left or right bracket.
Figure 3-11 Attaching the Cable Guide on the Catalyst 2948G-GE-TX Switch
1
1
Cable guide screw
The Catalyst 2948G-GE-TX switch ships with a special cable guide, as shown in
Figure
3-11. This cable guide secures up to 48 cables. Use the supplied black
screw to mount it on the left or right bracket.
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
Installing the Catalyst 2948G-GE-TX Switch
Figure
3-11, to attach the
3-15