Attaching The Optional Cable Guide - Cisco Catalyst 2900 SERIES XL Hardware Installation Manual

Installing the Switch in a Rack
Figure 2-11 Mounting the Switch in a Rack

Attaching the Optional Cable Guide

Catalyst 2900 Series XL Hardware Installation Guide
2-20
10 Ba se T/1 10 Ba se T/1
10 0B as eF
00 Ba se TX 00 Ba se TX
X
Phillips machine
screws
10 0B as eF
X
Phillips machine
screws
After the switch is mounted in the rack, power the switch as described in
"Powering On the Switch and Running POST" section on page
We recommend attaching the cable guide to prevent the cables from obscuring the
front panel of the switch and the other devices installed in the rack. If the switch
is in a 19-, 23-, or 24-inch rack, use the supplied black screw as shown in
Figure 2-12 to attach the cable guide to the left or right bracket. The cable guide
for the modular switches requires two screws.
Chapter 2
SE RI ES
SE RI ES
Installation
2-25.
78-6461-03