AT&T SL82318 - DECT 6.0 Digital Three Handset Answering System User Manual page 82

Appendix K
Troubleshooting
System does
not record
message.
Outgoing
announcement is
not clear.
Common cure
for electronic
equipment.
• Make sure the answering system is on (see page 44).
• Make sure the memory of the answering system is not
full.
• When you record your announcement, make sure you
speak in a normal tone of voice, about nine inches from
the telephone base.
• Make sure there is no background noise (TV, music, etc.)
while recording.
If the unit does not seem to be responding normally, try
putting the cordless handset in the telephone base or
charger. If it does not seem to respond, do the following (in
the order listed):
• Disconnect the power to the telephone base.
• Disconnect the cordless handset battery, and spare
battery, if applicable.
• Wait a few minutes.
• Connect power to the telephone base.
• Re-install the battery, and place the cordless handset
into the telephone base.
• Wait for the cordless handset to re-establish its
connection with the telephone base. Allow up to one
minute for this to take place.
79